Advanced Water Treatment Operator - Advanced Membrane Bioreactors

Recorded On: 10/20/2020

Membrane treatment is now a fundamental component of  water reuse schemes. Low pressure micro and ultrafiltration (MF/UF) membranes are widely used as part of reuse schemes to filter secondary or tertiary effluent directly, or are submerged in activated sludge in membrane bioreactors (MBRs) to replace clarification.

High pressure reverse osmosis (RO) membranes are used  to remove salt and act as a broad spectrum barrier to chemicals of concern. MF/UF membranes, MBRs and RO membranes also contribute to protection of public health by removing pathogenic microorganisms.

Critical control points and monitoring strategies are defined for each treatment process to assure that pathogen removal is achieved in water reuse. There are a number of ongoing research initiatives to improve the understanding of pathogen removal in MBRs to support their application in water reuse.

This session will comprise 3 modules and focus on: 
1 – Fundamentals of low and high pressure membrane filtration as well as biological treatment, 
2 – Applying critical control points for monitoring pathogen removal performance of membrane systems including, MF/UF, MBRs and RO.
3 – Current innovations supporting the application of MBRs for water reuse. 

At the end, a live Q&A will be facilitated with membrane filtration experts.

The session was recorded during CWEA's 2020 Virtual Annual Conference and Expo.

Amos Branch

Water Reuse Technologist

Carollo Engineers

Amos joinedCarollo as a Water Reuse Technologist in 2019. Prior to joining Carollo, Amoswas a post doctorate researcher at the Water Research Center at the Universityof New South Wales Australia. Amos has worked on a variety of microbial andchemical risk assessment projects related to water reuse and pilot testing andoptimization of membrane systems. Amos’ doctorate was the Australian researchbehind membrane bioreactor validation protocols, which are now being adaptedfor application in the U.S.

Registrants who view the full recording to see the slides and hear the audio will receive 2.4 contact hours towards CWEA's EIT & LAB certification.  It is not possible receive contact hours for both attending the live webinar and viewing the recording.  

Please note, all user activity of CWEA certification holders on the Online Wastewater Education Network is subject to the CWEA Code of Ethics standards for professional conduct and ethics. Certification holders should receive credit for a training only once within the same contact hour period. Any attempt to undermine the certification process may be subject to ethics procedures and possible sanctions.

For programs that are one hour or less:  to receive your contact hours for viewing the program, please note the one (1) attention check code that will be displayed during the program in the top left or right corner of the presentation for approximately 90 seconds.  Please enter this code in the "Attention Check Code" component under the "Contents" tab.

For programs that are more than one hour:  to receive your contact hours for viewing the program, two (2) different attention check codes that will be displayed at two different points during the program in the top left or right corner of the presentation for approximately 90 seconds.  Please enter these codes as 1st attention check code – 2nd attention check code (XXXX-XXXX) in the "Attention Check Code" component under the "Contents" tab.

Once you have entered the correct attendance check code(s), you will be able to create and download an electronic "Certificate of Completion" under the "Contents" tab.

Key:

Complete
Failed
Available
Locked
Advanced Water Treatment Operator - Advanced Membrane Bioreactors
Open to view video.
Open to view video. PLEASE USE GOOGLE CHROME, MICROSOFT EDGE OR FIREFOX TO ACCESSS THIS WEBINAR.
Evaluation of Program
8 Questions
8 Questions Thank you for attending this program. Please provide your feedback and suggestions as they are greatly appreciated.
Attendance Check Code
Enter code to continue.
Enter code to continue. To receive your contact hours for viewing the recording, please note the two (2) different attention check codes that will be displayed at two different points during the program in the top left or right corner of the presentation for 60-90 seconds. Please enter these codes as 1st attention check code – 2nd attention check code (XXXX-XXXX) in the "Attention Check Code" component under the "Contents" tab. Once you have entered the correct attendance check codes, you will be able to create and download an electronic "Certificate of Completion" under the "Contents" tab.
Certificate of Completion
Live Viewing: 2.40 contact hours towards CWEA's EIT & LAB certifications credits and certificate available
Live Viewing: 2.40 contact hours towards CWEA's EIT & LAB certifications credits and certificate available Please do not return this certificate to CWEA when applying for or renewing your CWEA Certification(s). These contact hours will be reflected in your mycwea.org account within 2-3 weeks following completion.