Water Math for Collections and Mechanical Technologist Grade 2 - Live Webinar

  • Registration Closed

Member fee: $50.00
Non-Member fee: $70.00

Contact Hours: 2.40 contact hours towards CWEA's Mechanical Technologist and Collection System Maintenance certifications

Learning Objective(s) - After participating in this session, attendees will be able to:

List the Knowledge, Skills and Abilities (KSAs) included in the Mechanical Technologist Grade 2 exam.
Practice basic math formulas needed for the Mechanical Technologist Grade 2 exam.
Describe the material you will need to study for the Mechanical Technologist Grade 2 exam.

William Cassidy

Engineering Supervisor

Orange County Sanitation District’s (OCSD) collection

William is the Engineering supervisor for of Orange County Sanitation District’s (OCSD) collection system.  Staffs have included design and resident (construction) engineers, collection system operations and maintenance staff, source control inspection staff, and odor & corrosion monitoring staff.  Responsibilities include but not limited to performing the most technically complex tasks of the division(s), reviewing staff’s work, and developing and advancing staff’s knowledge and skills. Project manager and engineer for the design and construction of the agency’s new and rehabilitated outlying pump stations and collection system. Achievements include setting / authoring OCSD’s pump station design approach & standards, devising equipment / process test procedures for unusual startups and developing divisional annual budgets and staffing requirements.     

Instructor – Technical Certification Program since 2011. Instructor for workshops assisting members with their preparation for the association’s certification tests.  Areas covered include collection system and mechanical maintenance with emphasis on mathematics.  Workshops held by the Association’s southern local sections including Santa Ana River Basin, Tri-Counties, Desert and Mountain, Santa Diego and Los Angeles Basin. 
CERTIFICATIONS:
California Water Environment Association Collection Systems Maintenance, Grade IV
California Water Environment Association Mechanical Technologies, Grade III

Roy Reynolds

Mechanical Maintenance Supervisor

Orange County Sanitation District

Roy Reynolds has 28 years of experience in the wastewater field. The last 18 years he has been a Maintenance Supervisor at Orange County Sanitation District in Southern California. He served in the U.S. Navy, assigned to the Seabees stationed in San Diego, before the Battalion moved to Port Hueneme California. He has been active in the CWEA sitting on many of the Local and State committees related to Maintenance and Certification. Currently serving the CWEA as the SARBS TCP Committee Chair.

Registrants who view the live webinar to see the slides and hear the audio and then enter the correct attention check code (directions below) will receive INSERT contact hours towards CWEA's INSERT certifications. 

To receive your contact hours for viewing the live webinar, please note the two (2) different attention check codes that will be displayed at two different points during the webinar in the top left or right corner of the presentation for approximately 90 seconds.  Please enter these codes as 1st attention check code – 2nd attention check code (XXXX-XXXX) in the Attention Check Code component under the "Contents" tab.  

Please note, all user activity of CWEA certification holders on the Online Wastewater Education Network is subject to the CWEA Code of Ethics standards for professional conduct and ethics. Certification holders should receive credit for a training only once within the same contact hour period. Any attempt to undermine the certification process may be subject to ethics procedures and possible sanctions. It is not possible to receive contact hours for both attending the live webinar and viewing the recording.  

Once you have entered the correct attendance check codes, you will be able to create and download an electronic certificate of completion under the "Contents" tab.

Key:

Complete
Failed
Available
Locked
Mechanical Technologist - Grade 2 Certification Training
04/15/2021 at 11:00 AM (PDT)   |  120 minutes
04/15/2021 at 11:00 AM (PDT)   |  120 minutes PLEASE USE GOOGLE CHROME, MICROSOFT EDGE OR FIREFOX TO ACCESSS THIS WEBINAR.
Evaluation of Program
8 Questions
8 Questions Thank you for attending this program. Please provide your feedback and suggestions as they are greatly appreciated.
Attendance Check Code
Enter code to continue.
Enter code to continue. To receive your contact hours for viewing the recording, please note the two (2) different attention check codes that will be displayed at two different points during the webinar in the top left or right corner of the presentation for approximately 90 seconds. Please enter these codes as 1st attention check code – 2nd attention check code (XXXX-XXXX) in the Attention Check Code component under the "Contents" tab. Once you have entered the correct attendance check codes, you will be able to create and download an electronic "Certificate of Completion" under the "Contents" tab.
Certificate of Completion
2.40 contact hours towards CWEA's Mechanical Technologist and Collection System Maintenance certifications credits  |  Certificate available
2.40 contact hours towards CWEA's Mechanical Technologist and Collection System Maintenance certifications credits  |  Certificate available Please do not return this certificate to CWEA when applying for or renewing your CWEA Certification(s). These contact hours will be reflected in your mycwea.org account within 2-3 weeks following completion.